Publication / 출판

International

  1. Lee, M.J., Yang, D.H., Lee, J.H. (2024). "Development of parametric bridge BIM and PCD generation algorithms and PCD-based member segmentation", Advances in Engineering Software, Vol.194
    https://doi.org/10.1016/j.advengsoft.2024.103673
  2. Ansari, A., Lee, J.H., Jang G.J., Alluqmani, A.E. (2024). "Seismic microzonation of North Gyeongsang (South Korea) considering liquefaction potential: Application towards seismic risk assessment for Korean nuclear power plants", Soil Dynamics and Earthquake Engineering, Vol.182
    https://doi.org/10.1016/j.soildyn.2024.108679
  3. Geum, S.K., Lee, J.H., Shin, D.H., Min, J.Y. (2024). "Acceleration data and shape change characteristics of a gravity quay wall according to inclination condition grades", Structural Engineering and Mechanics, Vol.90, No.6, p.591-600.
    https://doi.org/10.12989/sem.2024.90.6.591
  4. Lee, J.H., Jang, J.G. (2024). "Effects of carbonation curing on chemical attack in cement paste incorporating liquid-crystal display glass powder as a partial binder replacement", Case Studies in Construction Materials, Vol.20
    https://doi.org/10.1016/j.cscm.2024.e03251
  5. Lee, J.H., Ansari, A., An, H.J., Jeong, J.Y. (2024). "Seismic loss and resilience modeling of bridges in soft soils: towards the design of sustainable transportation infrastructure facilities", Sustainable and Resilient Infrastructure, Vol.9
    https://doi.org/10.1080/23789689.2024.2328979
  6. Song, M.K., Choi, E.S., Lee, J.H. (2024). "Development and Performance Evaluation of a Mechanical Connection for Steel and Shape Memory Alloy Bars", Structures, Vol.46, P.73-87.
    https://doi.org/10.1016/j.istruc.2022.10.040
  7. Choi, E.S., Jeon, J.S., Park, C.W. (2023). "Self-centering capacity of RC columns with smart plastic hinges of martensitic NiTi SMA bars", Smart Materials and Structures, Vol.32
    http://doi.org/10.1088/1361-665X/acfde3
  8. Park, J.H., Lee, J.H., Choi, E.S., Park, C.W. (2023). "Effects of double-arched geometry and tensile strength on the pullout resistance of fibers", Case Studies in Construction Materials, Vol.19
    https://doi.org/10.1016/j.cscm.2023.e02316
  9. Park, J.H., Yun, S.H., Park, C.H., Chun, S.C., Lee, J.H. (2023). "Effect of Dead Load on the Concrete Breakout Strength of a Bridge Bearing", Journal of the Korea Concrete Institute, Vol. 35, No. 3, p.317-325.
    https://doi.org/10.4334/JKCI.2023.35.3.317
  10. An, H.J., Cho, B.S., Park, J.H., Min, Lee, J.H. (2023). "Seismic Fragility Analysis of Concrete Bridges Considering the Lap Splices of T-type Column", Korean Society of Civil Engineers, Vol.43, no.3, pp.287-295.
    https://doi.org/10.12652/Ksce.2023.43.3.0287
  11. Park, J.H., Song, M.K., Lee, J.H. (2022). "Bond Performance Evaluation and Pullout Prediction Model for Double-Arched Steel Fiber", Journal of the Korea Concrete Institute, Vol.34, Iss.6, pp.667-674.
    https://doi.org/10.4334/JKCI.2022.34.6.667
  12. Choi, E.S., Lee, J.H., Choi, J.K. (2022). "Displacement recovery and energy dissipation of crimped NiTi SMA fibers during cyclic pullout tests", Reviews on Advanced Materials Science, Vol.61, Iss.1, pp.977-996.
    https://doi.org/10.1515/rams-2022-0285
  13. Choi, E.S., Ostadrahimi, A, Lee, J.H., Jeon, J.S. (2022). "On the efficiency of induced prestressing in SMA mortar beams through different thermal stimuli", Smart Materials and Structures,, Vol.31, Iss.12
    https://doi.org/10.1088/1361-665X/aca3e2
  14. An, H.J., Lee, J.H. (2022). "Deep neural network for prediction of time-history seismic response of bridges", Structural Engineering and Mechanics, An Int'l Journal, Vol.83, No.3, pp.401-413
    https://doi.org/10.12989/sem.2022.83.3.401
  15. Lee, J.H., Choi, E.S., Kang, J.W. (2022). "Development of cement composite with high-temperature detection performance using green earth", Case Studies in Construction Materials, Vol.16
    https://doi.org/10.1016/j.cscm.2022.e00969
  16. Lee, J.H., Choi, E.S., Jeon, J.S. (2021). "Experimental investigation on the performance of flexural displacement recovery using crimped shape memory alloy fibers", Vol.306, Construction and Building Materials
    https://doi.org/10.1016/j.conbuildmat.2021.124908
  17. Choi, E.S., Lee, J.H., Youn, H.J. (2020). "An Experimental Study on the Performance of a Damper Fabricated by Dual Rubber Springs", International Journal of STEEL STRUCTURES, Vol.20, No.6, pp.1891-1903
    https://doi.org/10.3390/app112110223
  18. Choi, E.S., Lee, J.H., Ostadrahimi, A. (2020). "Pullout resistance of crimped reinforcing fibers using cold-drawn NiTi SMA wires", Construction and Building Materials, Vol.265
    https://doi.org/10.1016/j.conbuildmat.2020.120858
  19. Lee, J.H., Cho, B.S., Choi, E.S. (2020). "Shear Failure Mode and Concrete Edge Breakout Resistance of Cast-In-Place Anchors in Steel Fiber-Reinforced Normal Strength Concrete", Applied Sciences, Vol.10, Iss.19
    https://doi.org/10.3390/app10196883
  20. An, H.J., Lee, J.H., Shin, S.B. (2020). "Dynamic Response Evaluation of Bridges Considering Aspect Ratio of Pier in Near-Fault and Far-Fault Ground Motions", Applied Sciences, Vol.10, Iss.17
    https://doi.org/10.3390/app10176098
  21. Shin, S.B., Lee, J.H. (2020). "Effects of prestressing force on natural frequency of prestressed concrete beams considering self-weight", Structural Engineering and Mechanics, An Int'l Journal, Vol.74, No.4, pp.495-502
    https://doi.org/10.12989/sem.2020.74.4.495
  22. Rajadurai, R.S., Lee, J.H., Choi, E.S., Kang, J.W. (2020). "MnNH4P2O7-Based Coating for High Temperature Assessment on the Surfaces of Cement Composites", Coatings, Vol.10, Iss.4
    https://doi.org/10.3390/coatings10040396
  23. Jung, C.Y., Woo, T.R., Lee, J.H. (2020). "Multi-Step Prestressing with Hybrid SMA Wires", Applied Sciences, Vol.10, Iss.8
    https://doi.org/10.3390/app10082842
  24. Rajadurai, R.S., Lee, J.H. (2020). "High Temperature Sensing and Detection for Cementitious Materials Using Manganese Violet Pigment", Materials, Vol.13, Iss.4
    https://doi.org/10.3390/ma13040993
  25. Jung, C.Y., Lee, J. H. (2020). "Crack closure and flexural tensile capacity with SMA fibers randomly embedded on tensile side of mortar beams", Nanotechnology Reviews, Vol.9, Iss.1
    https://doi.org/10.1515/ntrev-2020-0026
  26. Choi, E.S., Mohammadzadeh, B., Hwang, J.H., Lee, J.H. (2019). "Displacement-recovery-capacity of superelastic SMA fibers reinforced cementitious materials", Smart Structures and Systems, An International Journal, Vol.24, No.2
    https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/1263
  27. Lee, J.H., Jung, C.Y., Woo, T.R., Cheung, J.H. (2019). "Post-yielding tension stiffening of reinforced concrete members using an image analysis method with a consideration of steel ratios", Advances in Concrete Construction, Vol.7, No.2, PP.117-126
    https://doi.org/10.12989/acc.2019.7.2.117
  28. Lee, J.H., Hu, J.W., Kang, J.W. (2019). "Effects of blades inside a nozzle on the fiber orientation and distribution in fiber-reinforced cement-based materials", Composite Structures, Vol.221
    https://doi.org/10.1016/j.compstruct.2019.04.057
  29. Lee, J.H., Lee, K.J., Choi, E.S. (2018). "Flexural capacity and crack-closing performance of NiTi and NiTiNb shape-memory alloy fibers randomly distributed in mortar beams", Composites Part B: Engineering, Vol.153, pp.264-276
    https://doi.org/10.1016/j.compositesb.2018.06.030
  30. Lee, K.J., Lee, J.H., Jung, C.Y., Choi, E.S. (2018). "Crack-closing performance of NiTi and NiTiNb fibers in cement mortar beams using shape memory effects", Composite Structures, Vol.202, pp.710-718
    https://doi.org/10.1016/j.compstruct.2018.03.080
  31. Lee, J.H., Cho, B.S., Kim, J.B., Lee, K.J., Jung, C.Y. (2018). "Shear capacity of cast-in headed anchors in steel fiber-reinforced concrete", Engineering Structures, Vol.171, pp.421-432
    https://doi.org/10.1016/j.engstruct.2018.05.106
  32. Jeon, J.S., Lee, J.H., Park, S.H., Ha, S.W. (2018). "Assessment of probabilistic seismic performance of RC columns jacketed by FRP winding wires using analytical models", Engineering Structures, Vol.171, pp.629-646
    https://doi.org/10.1016/j.engstruct.2018.05.098
  33. Nguyen, D.K., Bach, Q.V., Lee, J.H., Kim, I.T. (2018). "Synthesis and Irreversible Thermochromic Sensor Applications of Manganese Violet", Materials, Vol.11, Iss.9
    https://doi.org/10.3390/ma11091693
  34. Park, Y.M., Kim, T.H., Kim, D.H., Kang, C.H., Lee, J.H. (2017). "Breakout shear strength of cast-in-place anchors using shaking table tests", Structures and Buildings, Vol.170, Iss.12, pp.939-950
    https://doi.org/10.1680/jstbu.16.00241
  35. Lee, J.H., Jung, C.Y., Choi, E.S., Jung, J.H. (2017). "Vision-based multipoint measurement systems for structural in-plane and out-of-plane movements including twisting rotation", Smart Structures and Systems, An International Journal, Vol.20 No.5, pp.563-572
    https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/5115
  36. Bas, S., Lee, J.H., Sevinc M., Kalkan, I. (2017). "Seismic performance of R/C structures under vertical ground motion", Computers and Concrete, An International Journal, Vol.20 No.4, pp.369-380
    https://doi.org/10.12989/cac.2017.20.4.369
  37. Lee, J.H., Kighuta, K. (2017). "Twin-twist effect of fibers on the pullout resistance in cementitious materials", Construction and Building Materials, Vol.146, pp.555-562
    https://doi.org/10.1016/j.conbuildmat.2017.04.147
  38. Lee, J.H. (2017). "Evaluation of the lateral stability of precast beams on an elastic bearing support with a consideration of the initial sweep", Engineering Structures, Vol.143, pp.101-112
    https://doi.org/10.1016/j.engstruct.2017.04.00
  39. Lee, J.H., Park, Y.M., Jung, C.Y., Kim, J.B. (2017). "Experimental and Measurement Methods for the Small-Scale Model Testing of Lateral and Torsional Stability", International Journal of Concrete Structures and Materials, Vol.11, Iss.2, pp.377-389
    https://doi.org/10.1007/s40069-017-0198-3
  40. Lee, J.H. (2017). "Influence of concrete strength combined with fiber content in the residual flexural strengths of fiber reinforced concrete", Composite Structures, Vol.168, pp.216-225
    https://doi.org/10.1016/j.compstruct.2017.01.052
  41. Lee, J.H., Cho, B.S., Choi, E.S. (2017). "Flexural capacity of fiber reinforced concrete with a consideration of concrete strength and fiber content", Construction and Building Materials, Vol.138, pp.222-231
    https://doi.org/10.1016/j.conbuildmat.2017.01.096
  42. Lee, J.H., Kalkan, I., Lee, J.J., Cheung, J.H. (2017). "Rollover instability of precast girders subjected to wind load", Magazine of Concrete Research, Vol.69, Iss.2, pp.68-83
    https://doi.org/10.1680/jmacr.16.00187
  43. Choi, E.S., Kim, D.K., Lee, J. H., Ryu, G.S. (2017). "Monotonic and hysteretic pullout behavior of superelastic SMA fibers with different anchorages", Composites Part B: Engineering, Vol.108, pp.232-242
    https://doi.org/10.1016/j.compositesb.2016.09.080
  44. Lee, J.H., Cho, B.S., Choi, E.S., Kim, Y.H. (2016). "Experimental study of the reinforcement effect of macro-type high strength polypropylene on the flexural capacity of concrete", Construction and Building Materials, Vol.126, pp.967-975
    https://doi.org/10.1016/j.conbuildmat.2016.09.017
  45. Huh, J.W., Tran, Q. H., Lee, J.H., Han, D.Y., Ahn, J.H., Yim, S. (2016). "Experimental Study on Detection of Deterioration in Concrete Using Infrared Thermography Technique", Concrete Durability and Steel Corrosion, Vol.2016, pp.1-12
    https://doi.org/10.1155/2016/1053856
  46. Kim, D.H., Park, Y.M., Kang, C.H., Lee, J.H. (2016). "Dynamic shear strength of unreinforced and Hairpin-reinforced cast-in-place anchors using shaking table tests", Structural engineering and mechanics : An international journal, Vol.58, No.1, pp.39-58
    https://doi.org/10.12989/sem.2016.58.1.039
  47. Lee, J.H., Huh, J.W., Lee, J.J. (2016). "A comparative study on wind loads between design standards for the design of pipe-rack structures", KSCE Journal of Civil Engineering, Vol.20, Iss.1, pp.293-300
    https://doi.org/10.1007/s12205-015-0359-3
  48. Park, Y.S., Agbayani, J.A., Lee, J.H., Lee, J.J. (2016). "Rotational Angle Measurement of Bridge Support Using Image Processing Techniques", Journal of Sensors, Vol.2016, pp.1-9
    https://doi.org/10.1155/2016/1923934
  49. Choi, E.S., Hu, J.W., Lee, J.H., Cho, B.S (2015). "Recovery stress of shape memory alloy wires induced by hydration heat of concrete in reinforced concrete beams", Journal of Intelligent Material Systems and Structures, Vol.26, pp.29-37
    https://www.researchgate.net/publication/281601379
  50. Kalkan, I., Lee, J.H. (2013). "Effect of shrinkage restraint on deflections of reinforced self-compacting concrete beams", KSCE Journal of Civil Engineering, Vol.17, pp.1672-1681
    https://doi.org/10.1007/s12205-013-1007-4
  51. Buyukkaragoz, A., Kalkan, I., Lee, J.H. (2013). "A Numerical Study of the Flexural Behavior of Concrete Beams Reinforced with AFRP Bars", Strength of Materials, Vol.45, pp.716-729
    https://doi.org/10.1007/s11223-013-9507-5
  52. Lee, J.H., Ho, H.N., Shinozuka, M., Lee, J.J. (2012). "An advanced vision-based system for real-time displacement measurement of high-rise buildings", Smart Materials and Structures, Vol.21, No.12
    https://doi.org/10.1088/0964-1726/21/12/125019
  53. Lee, J.H., Jung, J.E., Kim, N.G., Song, B.H. (2012). "Industrial Pipe Rack Health Monitoring System Based on Reliable-Secure Wireless Sensor Network", International Journal of Distributed Sensor Networks, Vol.2012
    https://doi.org/10.1155/2012/641391
  54. Ho, H.N., Park, Y.S., Lee, J.H., Lee, J.J. (2012). "A Synchronized Multipoint Vision-Based System for Displacement of Civil Infra-Structures", The Scientific World Journal, Vol.2012
    https://doi.org/10.1100/2012/519146
  55. Lee, J.H. (2012). "Investigation of Extreme Environmental Conditions and Design Thermal Gradients during Construction for Prestressed Concrete Bridge Girders", Journal of Bridge Engineering, Vol.17, Iss.3
    https://doi.org/10.1061/(ASCE)BE.1943-5592.0000277
  56. Lee, J.H. (2012). "Behavior of precast prestressed concrete bridge girders involving thermal effects and initial imperfections during construction", Engineering Structures, Vol.42, pp.1-8
    https://doi.org/10.1016/j.engstruct.2012.04.003
  57. Lee, J.J., Ho, H.N., Lee, J.H. (2012). "A Vision-Based Dynamic Rotational Angle Measurement System for Large Civil Structures", Sensors, Vol.12, Iss.6, pp.7326-7336
    https://doi.org/10.3390/s120607326
  58. Lee, J.H., Kalkan, I. (2012). "Analysis of Thermal Environmental Effects on Precast Prestressed Concrete Bridge Girders: Temperature Differentials and Thermal Deformations", Advances in Structural Engineering, Vol.15, Iss.3
    https://doi.org/10.1260/1369-4332.15.3.447

Domestic

  1. 한만석, 송민규, 신수봉, 이종한 (2024). "PSC-box 철도교량의 KTX 및 EMU 고속열차에 대한 동적 응답 특성 분석", Korea Institute for Structural Maintenance and Inspection, Vol.28, no.2, p.61-68.
    https://doi.org/10.11112/jksmi.2024.28.2.61
  2. 정현진, 박기태, 김재환, 권태호, 이종한 (2024). "랜덤포레스트를 활용한 교량 바닥판의 이중손상 원인 추정 기술 개발", Korean Society of Civil Engineers, Vol.44, No.1, P.19-32.
    http://doi.org/10.12652/Ksce.2024.44.1.0019
  3. 양다현, 이민진, 안효준, 정현진, 이종한 (2023). "교량 바닥판의 균열 BIM 생성 및 BIM-FEM 상호 연계 알고리즘 개발", Korean Society of Civil Engineers, Vol.43, No.6, P.689-698.
    https://doi.org/10.12652/Ksce.2023.43.6.0689
  4. 정현진, 안효준, 김재환, 박기태, 이종한 (2023). "단경간 및 다경간 PSC-I 교량의 바닥판 및 거더의 균열분포 예측", Korea Institute for Structural Maintenance and Inspection, Vol.27, No.6
    https://doi.org/10.11112/jksmi.2023.27.6.102
  5. 박주현, 민지영, 이종한 (2023). "원거리와 근거리 지진파의 특성을 고려한 항만 컨테이너 크레인의 지진취약도 분석", Earthquake Engineering Society of Korea, Vol.27, Iss.9, pp.83-90.
    https://doi.org/10.5000/EESK.2023.27.2.083
  6. 정현진, 안효준, 김재환, 박기태, 이종한 (2022). "RC 슬래브교의 바닥판 균열 열화모델에 따른 이종손상 확산 분석", Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 26, No. 6, pp.93-101.
    https://doi.org/10.11112/jksmi.2022.26.6.93
  7. 박주현, 송민규, 이종한 (2022). "Bond Performance Evaluation and Pullout Prediction Model for Double-Arched Steel Fiber", Journal of the Korea Concrete Institute, Vol. 34, No. 6, pp. 667-674.
    https://doi.org/10.4334/JKCI.2022.34.6.667
  8. 안효준, 이종한, 박기태, 정규산, 김유희 (2021). "RC 슬래브 교량의 요소별 노후도를 고려한 지진취약도 비교분석", Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 25, No. 6, pp.177-184
    https://doi.org/10.11112/jksmi.2021.25.6.177
  9. 정현진, 안효준, 이종한, 박기태, 정규산, 김유희 (2021). "RC 슬래브교의 신축이음 손상과 바닥판 응답과의 상관관계 분석", Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 25, No. 6, pp.245-253
    https://doi.org/10.11112/jksmi.2021.25.6.245
  10. 안효준, 신수봉, 이종한 (2021). "PSC교량의 부재별 상관관계를 고려한 시스템 지진취약도 분석", Earthquake Engineering Society of Korea, Vol. 25, No. 6, 267-274
    https://doi.org/10.5000/EESK.2021.25.6.267
  11. 정현진, 이상화, 김세호, 안효준, 이종한 (2021). "Investigation of seismic behavior of low-rise piloti structure according to seismic design and base isolation of columns", Journal of the Korea Concrete Institute, Vol. 33, No. 3, 271-278
    https://doi.org/10.4334/JKCI.2021.33.3.271
  12. 한만석, 박주현, 안효준, 민지영, 이종한 (2021). "Analysis of condition evaluation and structural safety for rebar exposure and corrosion in RC slab bridge decks", Journal of the Korea Concrete Institute, Vol. 33, No. 2, pp. 167-173
    https://doi.org/10.4334/JKCI.2021.33.2.167
  13. 한만석, 박주현, 이종한, 민지영 (2021). "PSC I형 교량 바닥판의 철근노출 및 부식에 대한 구조적 안전성 분석", Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 25, No. 1, pp.67-74
    https://doi.org/10.11112/jksmi.2021.25.1.67
  14. 박세인, 박주현, 안효준, 이종한 (2021). "손상시나리오 기반 시스템 동바리 취약부재 도출 및 붕괴 위험성 분석", Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 25, No. 1, pp.33-40
    https://doi.org/10.11112/jksmi.2021.25.1.33
  15. 안효준, 이종한 (2020). "PSC 교량의 노후도 및 FRP 보강 효과를 고려한 지진취약도 분석", Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 24, No. 6, December 2020, pp.34-41
    https://doi.org/10.11112/jksmi.2020.24.6.34
  16. 우태련, 정치영, 김인태, 이종한, 정진환 (2020). "색상에 기반한 영상분석기법을 이용한 콘크리트 거더의 휨 거동 분석", Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 24, No. 4, August 2020, pp.48-54
    https://doi.org/10.11112/jksmi.2020.24.4.48
  17. 박주현, 안효준, 한만석, 민지영, 이종한 (2020). "노후 교량 유지관리를 위한 상부구조물의 상태평가 결과와 교량의 안전성 및 내하력과의 상관관계 분석", Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 24, No. 4, pp.64-71
    https://doi.org/10.11112/jksmi.2020.24.4.64
  18. 장지원, 안효준, 이종한, 신수봉 (2019). "블레이드의 표면 결함 검출을 위한 Faster R-CNN 딥러닝 모델 구축", Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 23, No. 7, December 2019, pp.80-86
    https://doi.org/10.11112/jksmi.2019.23.7.80
  19. 한만석, 신수봉, 문태욱, 김다운, 이종한 (2019). "보 구조물에서 변형률 계측 데이터를 활용한 디지털트윈 모델 구현", Korea Institute of Building Information Modeling, Vol.9, No.3, pp.1-7
    https://doi.org/10.13161/kibim.2019.9.3.001
  20. 이종한 (2019). "Experimental study of the prestressing effect in cement-based composites using SMA fibers", Journal of the Korea Concrete Institute, Vol. 31, No. 3, p.293-298
    http://doi.org/10.4334/JKCI.2019.31.3.211
  21. 정치영, 우태련, 이종한, 정진환 (2019). "SMA 와이어를 이용한 연결재의 인발저항성능 평가", Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 23, No. 1, pp.130-137
    https://doi.org/10.11112/jksmi.2019.23.1.130
  22. 이종한 (2018). "타설 노즐의 내부 블레이드에 의한 섬유 방향성 제어 성능에 관한 수치 해석적 연구", Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 22, No. 6, pp.157-163
    https://doi.org/10.11112/jksmi.2018.22.6.157
  23. Ali Azad, 이종재, 이종한, 이건준, 안윤규 (2018). "SFRSCC의 섬유 방향성에 미치는 입구 속도와 점성의 영향성에 대한 수치해석", Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 22, No. 3, pp.16-20
    https://doi.org/10.11112/jksmi.2018.22.3.016
  24. 이종한, 이건준, Kabuyaya Kighuta (2018). "비부착 긴장력이 거더의 횡비틀림 안정성에 미치는 영향", Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 22, No. 3, pp.8-15
    https://doi.org/10.11112/jksmi.2018.22.3.008
  25. 김태형, 박용명, 강충현, 이종한 (2018). "스터럽 보강 선설치 앵커의 지진모의실험에 의한동적 전단 저항강도 평가", Journal of Korean Society of Steel Construction, Vol.30, No.2, pp.67-76
    https://doi.org/10.7781/kjoss.2018.30.2.067
  26. 우태련, 이종한, 정진환, 정치영 (2018). "1축 인장시험을 통한 커플러가 철근 연성도에 미치는 영향 평가", Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 22, No. 1, pp.90-98
    https://doi.org/10.11112/jksmi.2018.22.1.090
  27. 정진환, 이종한, 우태련, 정치영 (2017). "영상분석기법을 이용한 철근의 변형률 및 넥킹구간 평가", Journal of the Korea Concrete Institute, Vol. 29, No. 1, pp. 33-42
    https://doi.org/10.4334/JKCI.2017.29.1.033
  28. 이종한, 조백순, 조창오 (2016). "강섬유 보강 콘크리트 인장성능 평가방법에 따른 지반 바닥슬래브의 설계", Journal of the Korea Concrete Institute, Vol. 28, No. 1, pp. 95-104
    http://dx.doi.org/10.4334/JKCI.2016.28.1.095
  29. 이종한, 김경환, 조백순 (2015). "시공 중 풍하중에 의한 PSC 교량 거더의 횡방향 거동 해석", Journal of the Korea Concrete Institute, Vol. 27, No. 4, pp. 377-385
    http://dx.doi.org/10.4334/JKCI.2015.27.4.377
  30. 박용명, 김태형, 김동현, 조성훈, 이종한 (2015). "지진모의실험에 의한 비균열 및 균열콘크리트에 매입된 비보강 선설치앵커의 전단 저항강도 평가", Journal of Korean Society of Steel Construction, Vol.27, No.3, pp.347-357
    http://dx.doi.org/10.7781/kjoss.2015.27.3.347
  31. 하성진, 강수태, 이종한 (2015). "분산제의 종류 및 사용량에 따른 CNT 보강 시멘트 복합체의 강도변화", Journal of the Korea Institute for Structural Maintenance and Inspection, Vol.19, No.2, pp.99-107
    https://doi.org/10.11112/JKSMI.2015.19.2.099
  32. 이종한, 권혁배, 강수태, (2015). "보강재 박리에 의한 GFRP 휨 보강 RC보의 파괴강도에 관한 실험 및해석적 연구", Journal of the Korean Society of Civil Engineers, Vol.35, No.1, pp.39-48
    https://doi.org/10.12652/Ksce.2015.35.1.0039
  33. 박용명, 주호중, 김동현, 강문기, 이종한 (2015). "균열콘크리트에 매입된 선설치앵커의 정적 전단하중에 대한 저항강도", Journal of Korean Society of Steel Construction, Vol.27, No.1, pp.87-97
    http://dx.doi.org/10.7781/kjoss.2015.27.1.087
  34. 조백순, 이종한, 백성용 (2014). "폴리프로필렌 및 강섬유 보강콘크리트의 휨 성능에 관한 비교 연구", Journal of the Korean Society of Civil Engineers, Vol.34, No.6, pp.1677-1685
    http://dx.doi.org/10.12652/Ksce.2014.34.6.1677
  35. 박용명, 강문기, 김동현, 이종한, 강충현 (2014). "선설치앵커의 동적 전단하중에 대한 저항강도: 비보강 앵커", Journal of Korean Society of Steel Construction, Vol.26, No.1, pp.21-30
    http://dx.doi.org/10.7781/kjoss.2014.26.1.021
  36. 조백순, 이종한, 최은수 (2013). "FRP 와이어 보강 콘크리트 공시체의 압축거동", Journal of the Korean Society of Civil Engineers, Vol.33, No.5, pp.1765-1775
    https://doi.org/10.12652/Ksce.2013.33.5.1765
  37. 박재봉, 박용명, 김동현, 이종한 (2013). "신뢰도 기반 활하중모델에 의한 강합성 사장교의 충격계수 평가", Journal of Korean Society of Steel Construction, Vol.25, No.4, pp.335-346
    http://dx.doi.org/10.7781/kjoss.2013.25.4.335
  38. 이종한, 이종재, 조백순 (2012). "Effective Prediction of Thermal Conductivity of Concrete using Neural Network Method", International Journal of Concrete Structures and Materials, Vol.6, No.3, pp.177-186
    https://doi.org/10.1007/s40069-012-0016-x

Conference / 학회

  1. ( ). " ", ,
  2. ( ). " ", ,